📦 Material guidelines
Material handling & storage
Proper care for optimal performance
Guidelines for material preservation
NU-GLAZE® Profiles
At all times, keep profiles in the plastic sheeting for as long as possible to keep dust and sand out.
Keep closed bundles aside and work only from one opened bundle.
Always keep profiles lying flat and straight on a smooth floor, never stand against a wall for longer than 10 minutes.
Keep profiles out of sun, extreme low or high temperatures whilst not installed yet.
Once installed, it can handle full sun and moderate temperature differences.
No stacking of heavy, sharp objects on top of the profiles.
No walking over it or stepping onto the profiles.
Neutral cure Silicone/Siliconized Acrylic sealant
Keep in a cool (below 25 degrees Celsius) place, out of sunlight.
Keep cartridges closed for as long as possible, only use one at a time per person.
Don't stack heavy items on top of silicone.
MSX-1 Multi purpose Miter Cutter
Beware - sharp blade - Keep away from small children.
Keep dry and metal parts lightly oiled. Although the metal parts are stainless steel, it can form surface corrosion if left in a wet/damp environment.
Keep small parts (blades, service tool, anvil and info brochure) safe and secure together with the cutter.
Although the material is tough, avoid dropping from heights or stacking heavy items on the cutter.
Avoid very high temperatures (above 40°-60°) over prolonged periods, as the Thermoplastics (e.g. Nylon, HDPE parts) may deform or even melt.
Important note
Once the material is in your possession, you take full responsibility. Please respect the fact that Nu-Glaze is a finishing product. In other words, if it gets damaged, that is what you will see once the work is complete.